Premium Industrial Storage Stacking Shelves Racks Heavy Duty Steel EU Pallet Racking System for Logistics Warehouses
European-pallet geometry, high-load beams and powder-coated uprights — re-branded to your RAL colour and packaging.
View productEvery supplier calls itself a manufacturer. The difference between a factory and a trading desk shows up in tolerances, paperwork and the day a container arrives on site.
In storage equipment, OEM (Original Equipment Manufacturer) means you bring the design — your upright profile, your beam hole pattern, your load table, your powder-coat colour, your brand plate. We manufacture to that specification at production tolerance, run dimensional and load verification, and pack it under your identity. ODM (Original Design Manufacturer) means you start from a design we already engineered, patented and tested — selective pallet racking, radio shuttle lanes, mezzanine platforms — and we re-size, re-brand and ship it under your label, typically faster and with lower tooling cost.
Neither route is universally better. If you distribute racking under your own brand and need consistent cross-sections across regions, OEM protects your standard. If you are a 3PL or contractor who needs a proven, buildable system in the shortest possible cycle, ODM compresses the timeline from weeks to days. What matters is that the party calculating your load capacity is the same party building and packing it.
Over 3,500 delivered projects across Latin America, the Middle East and Southeast Asia, the same four failures repeat: racking resized at the port because the original drawing ignored forklift aisle clearances; welds that pass visual inspection but not a torque check; packaging that collapses after two transhipments; and documentation missing the certificate of origin, delaying clearance by weeks. A genuine OEM/ODM supplier solves all four before the container is sealed.
| Decision Point | OEM — You Own the Design | ODM — You Own the Brand |
|---|---|---|
| Design source | Your drawings, profiles and load tables; we verify manufacturability | Our patented, load-tested platform, re-sized to your warehouse |
| Branding | Your nameplate, silk-screen, carton print and manual in your language | Our design, your label, colour card and packaging |
| Typical lead time | 12–20 days after drawing approval | 10–15 days after drawing approval |
| Engineering effort | Joint — you specify, we validate and value-engineer | Carried by us, including seismic and slab checks |
| Best fit for | Chain warehouses, distributors with a fixed standard, tender projects | Distributors and contractors who need speed, low MOQ and market entry |
Each system below can be re-branded, re-coloured, re-packaged and re-engineered to your pallet data. All eight are produced on our own lines and covered by a 10-year warranty.
European-pallet geometry, high-load beams and powder-coated uprights — re-branded to your RAL colour and packaging.
View product
Mixed-configuration layout combining pallet levels, tyre racks and slotted angle shelving for multi-SKU warehouses.
View product
Rapid-delivery ODM pallet racking engineered for multi-client 3PL environments and shared aisle operations.
View product
Rack-supported loft platforms that add up to a full extra floor of usable area without extending the building.
View product
Two-tier anti-rust platform rated at 300 kg/m² — built for humid, coastal and lightly corrosive environments.
View product
CE-certified selective racking with heavier upright sections, higher safety factors and 100% pallet selectivity.
View product
Bolted modular construction — relocated, extended or re-configured on site as your throughput changes.
View product
Q235B structural steel selective racking with powder-coated or galvanised finishes for volume OEM orders.
View productSince 2007 we have roll-formed, welded, pre-treated and powder-coated industrial storage systems in our own facility, exporting more than 600 containers a year. The engineer who calculates your load table is on the same site as the line that builds it.
More than 20 automatic roll-forming lines and 30,000 tons of annual output keep profiles consistent and lead times short — no outsourced uprights, no mixed-batch colour drift.
Professional engineers provide free consultation, 2D/3D warehouse layout and an itemised quotation within 48 hours — including seismic and slab verification for your site.
CE and ISO certified materials, patented products with independent intellectual property, and inspection before every packing — verified by clients in more than 60 countries.
Transparent, itemised pricing with no trading layers, plus 10–15 day production after drawing approval and full export documentation for smooth customs clearance.
10-Year Warranty Insurance. All racking products are covered for ten years against quality issues caused by our design, manufacturing, transportation or installation guidance — including replacement of non-conforming components.
Four engineering directions are already visible in the specifications our OEM clients are submitting for 2026–2030 projects.
Radio shuttle and four-way shuttle lanes are replacing plain drive-in storage wherever SKU counts drop and throughput rises — typically recovering 40–60% more pallet positions in the same footprint.
Upright bracing, base plates, row spacers and chemical anchors are now engineered against site seismic zone and soil class as standard, not as a post-tender add-on — critical for Chile, Peru, Mexico and Central America.
Hot-dip galvanised and pre-galvanised sections are displacing standard powder coating in coastal, tropical and cold-chain facilities, where condensation destroys untreated steel within a few seasons.
Layouts are increasingly delivered as 3D models conflict-checked against forklift turning radii and WMS slotting data before quotation — reducing site rework and re-quotes on overseas projects.
Purchasing behaviour is shifting from buying steel by the ton to buying output capacity, compliance and speed. These four shifts are reshaping supplier shortlists.
Buyers now ask “how many pallet positions per square metre at what pick rate”, not “how much does a bay cost”. Suppliers who cannot model throughput lose the tender early.
CE certification, seismic calculation reports and material traceability are moving from “nice to have” to mandatory tender gates — particularly for multi-site retail, 3PL and cold-chain operators.
Warehouses are moving closer to end markets in Mexico and Central America, but base manufacturing capacity still concentrates with specialist Asian factories — so port-to-port logistics planning now decides project timelines.
Suppliers who issue a correct commercial invoice, packing list, bill of lading and certificate of origin with Spanish or Portuguese labelling win repeat orders — clearance delays cost far more than the racking.
The same racking profile performs very differently in a freezer, a coastal port warehouse and a nearshoring parts plant. Configuration follows the product and the climate.
Galvanised drive-in and shuttle racking for fruit, coffee, seafood and dairy in chilled and frozen rooms, where condensation control determines service life.
Carton-flow lanes, multi-tier mezzanines and selective pallet racking combined to separate fast-pick from bulk reserve in high-turnover fulfilment hubs.
Heavy-duty selective racking and steel platforms for parts and components in the plants relocating across Mexico and Brazil under nearshoring programmes.
Deep-lane drive-in and radio shuttle configurations for bottled drinks, beer and consumer goods where volume per SKU is high and access speed is secondary.
Cleanable shelving, multi-level picking platforms and mezzanine offices for medicine distributors, supermarkets and shopping-centre logistics.
Cantilever and heavy-duty platform solutions for pipes, steel bar, profiles and mining spares — standard loads in Chile, Peru and northern Mexico.
A workflow refined across more than 3,500 international projects, designed to remove the two biggest causes of delay: incomplete data and unapproved drawings.
Send the building plan, pallet size and weight, forklift type, slab data, seismic zone, temperature range and destination port.
Free 2D/3D layout, load calculation and a line-by-line quotation — including OEM tooling or ODM branding costs — within 48 hours.
Manufacturing in 10–15 days after drawing approval, with dimensional, coating-thickness and load checks before packing.
Optimised container loading, complete export documentation, plus installation drawings, manuals or remote supervision on site.
OEM means you supply the design — profile, hole pattern, load table and brand colour — and we manufacture to your specification. ODM means you select a design we already engineered and load-tested, and we customise dimensions, colour and branding for you. OEM gives you a protected standard; ODM gives you speed, a lower MOQ and lower tooling cost.
Yes. We produce nameplates, silk-screening, carton printing, barcode labels and user manuals in your brand and in English, Spanish or Portuguese. Mixed-container orders can carry several brand variants as long as the bagging and mapping list is agreed before production.
Yes. We calculate upright, beam and anchor requirements from your site seismic zone, soil class and floor-slab data, and typically specify reinforced base plates, heavier bracing, row spacers and chemical anchors. We always recommend final validation by a locally licensed structural engineer before installation.
Standard components receive phosphating pre-treatment and electrostatic powder coating. For coastal, high-humidity and cold-chain facilities we offer hot-dip galvanised or pre-galvanised uprights and beams, plus zinc-rich primer options, to extend corrosion resistance well beyond the standard finish.
Production is typically 10–15 days after drawing approval for ODM systems and 12–20 days for OEM tooling and custom profiles. Ocean transit adds around 18–30 days to Mexican ports and 25–45 days to South American ports. Minimum order quantity depends on the system — mixed containers combining pallet racking, shelving and mezzanine components are common.
All racking products carry a 10-year warranty against quality issues caused by our design, manufacturing, transportation or installation guidance. Spare uprights, beams, safety clips, row spacers and anchors are stocked for repeat orders, and installation support is available as drawings, remote guidance or on-site supervision.
Send your floor plan, pallet data and destination port. Our engineers will return a free layout, a load calculation and an itemised quotation within 48 hours — with OEM tooling and ODM branding options priced side by side.