Factory-direct wide aisle and selective pallet racking engineered for Curitiba warehouses, with corrosion protection, load calculations, container-optimized export packing and delivery support to Paranaguá, Itajaí and Santos.
Send an InquiryA wide aisle layout is not a single catalogue item. It is an engineered combination of selective pallet racking, heavy-duty beams, safety accessories and optional high-density modules. The eight production-ready systems below cover standard direct-access storage, cold-chain rooms, long loads and higher-density alternatives for Curitiba warehouses. Product URLs are preserved below; where a product URL exists, it is used exactly as supplied.

For pipes, profiles, timber and long steel in Curitiba fabrication and building-material warehouses. Adjustable arms, heavy load capacity and corrosion-protected finish support covered indoor and semi-exposed storage.
View product →
Multi-layer pallet storage with thick beams and mould-storage capability. A practical option when a Curitiba site needs more pallet positions without extending the building footprint.
View product →
Selective industrial pallet racking with a back stopper to reduce pallet push-through risk. Well suited to busy loading faces, 3PL operations and mixed-SKU distribution centres.
View product →
Push-back pallet racking with guide rails for LIFO storage and fewer working aisles. Useful when medium SKU counts and high-volume pallets justify denser storage than standard selective racking.
View product →
High-capacity steel warehouse racking for general industrial storage, spare parts and contract logistics. Configurable beam levels and accessories support standard forklift access.
View product →
Pallet racking produced to AS 4084 design requirements for projects specifying Australian-standard storage. Final design should be confirmed with the engineer of record and local authority.
View product →
Q235B steel selective pallet racking for heavy-duty direct access. A practical base system for wide aisle layouts where every pallet must remain visible and accessible.
View product →
Heavy-duty cold-store pallet racking for chilled and frozen rooms. Specify suitable coating, steel toughness and condensation management for Curitiba food and pharmaceutical cold chains.
View product →Curitiba is one of southern Brazil’s most important logistics and industrial hubs. The city and its metropolitan region — including CIC, São José dos Pinhais, Araucária and neighbouring municipalities — support automotive, food and beverage, retail, e-commerce, building materials, chemicals and 3PL operations. Most imported racking reaches the region through Paranaguá, Itajaí or Santos, then travels by road. That combination of industrial demand, humid subtropical weather and port-based supply chains shapes the racking specification.
Wide aisle pallet racking is a selective storage configuration with conventional working aisles, usually around 3.5–4.2 m depending on forklift model, load dimensions and safety clearances. It is not the densest option, but it delivers something many Curitiba operations value more: direct access to every pallet, fast picking, simple supervision and lower capital cost. For distributors with high SKU counts, mixed pallets and standard counterbalance forklifts, a well-engineered wide aisle layout often beats high-density systems on total cost and day-to-day flexibility.
The key is to specify it properly. A China supplier can offer a competitive price, but the project still needs correct beam deflection, upright capacity, floor-slab verification, anchor design, impact protection and safe working loads. Lottot combines factory production with engineering drawings so that the racking is built around your pallet data — not sold as a catalogue item.
Wide aisle pallet racking is rarely purchased alone. It is usually combined with specialist storage modules to match the product mix, turn frequency, temperature and handling equipment found in Paraná.
Chilled and frozen storage for meat, dairy, fruit and food ingredients. Specify powder coating or hot-dip galvanizing, condensation control and racking that tolerates wash-down and temperature cycles.
São José dos Pinhais and CIC supply chains handle heavy components, tooling and spare parts. Heavy-duty Q235B selective racking with load labels and forklift impact protection keeps dense metal loads organised.
High-SKU distribution requires fast access and clear pick faces. Wide aisle selective racking can be paired with carton-flow pick modules and mezzanine platforms as online order volumes grow.
Flexible beam levels, mix-and-match accessories and easy reconfiguration matter when pallet profiles change by client. Wide aisle layouts are straightforward to audit, label and inspect.
Cantilever racking and heavy-duty pallet racking serve timber, pipes, profiles and construction products. Corrosion protection is important in humid or semi-exposed warehouses.
Fast-moving bottled drinks and consumer goods can use push-back or drive-in storage for dense reserve stock, while wide aisle selective racking handles active SKUs and promotional pick faces.
Buyers in Paraná are not simply buying steel. They are responding to e-commerce service levels, cold-chain investment, labour availability, energy costs and tighter safety expectations.
Faster delivery windows and more SKUs are pushing Curitiba distributors toward flexible selective racking that can be combined with carton-flow picking and mezzanine platforms.
Food, pharmaceutical and agro-export supply chains continue to invest in chilled and frozen capacity. Cold-room racking needs corrosion protection, suitable steel toughness and condensation-aware detailing.
Warehouse operators are paying more attention to load signs, annual inspections, impact protection, anchor condition and engineer approval. Racking is now treated as an engineered asset, not shelving.
Container fill, modular beam and upright lengths, mixed-product loading and spare-part planning are becoming part of the buying decision. Freight efficiency can matter as much as the unit price.
Lottot Storage Solutions Co., Ltd. has manufactured industrial storage systems since 2007 from its own facility in Nanjing, China. Every upright and beam is roll-formed, welded, pre-treated and powder-coated on controlled production lines, then checked against the approved drawing before packing.
For a Curitiba project, this factory-direct model removes trading layers and gives your team direct access to the people who calculate the load capacity, prepare the layout and plan the container. Export packing is designed for long ocean transit, with labelled bundles, installation drawings and a loading plan that helps your Brazilian installer receive the right parts in the right sequence.
10-Year Warranty Insurance. We cover all racking products for ten years and resolve quality issues caused by our design, manufacturing, transportation or installation guidance. For Brazilian projects, we recommend keeping a small buffer of uprights, beams, safety clips and anchors to support inspections and future layout changes.
Aisle width must always be confirmed with your forklift model, load dimensions, turning radius and local safety requirements. The table below is a planning guide, not a substitute for engineered drawings.
| System | Best Fit | Selectivity | Storage Density | Typical Aisle / Operation |
|---|---|---|---|---|
| Wide aisle selective | Many SKUs, direct access, standard counterbalance forklifts | 100% | Low–medium | 3.5–4.2 m; fast picking and simple supervision |
| Narrow aisle / VNA | High-bay warehouses, high SKU count, specialised trucks | 100% | Medium–high | 1.6–2.0 m; higher equipment and floor tolerance requirements |
| Double-deep | Medium SKU count, paired pallets, reach-truck operation | About 50% | Medium–high | 3.0–3.8 m; less access than selective |
| Push back | Medium SKU count, LIFO reserve storage, space saving | Last-in, first-out | Medium–high | Single working aisle; good space gain with moderate throughput |
| Drive-in | Low SKU count, high-volume homogeneous products | LIFO or FIFO by design | High | Forklifts drive into lanes; dense but slower access |
| Radio shuttle | Very high volume, cold chain, deep-lane storage | LIFO or FIFO | Very high | Shuttle lanes; higher automation investment |
For most Curitiba distributors, a well-designed wide aisle selective layout is the most practical starting point. If land cost, cold-room energy use or seasonal peak volume later justify denser storage, the layout can be phased with push-back, drive-in or shuttle modules.
Wide aisle racking appears simple, but the difference between a safe installation and an overloaded one is usually buried in the load calculations. Before quoting, our engineers review pallet weight, load dimensions, beam spans, upright capacity, bracing, floor slab condition, anchor requirements and forklift impact risk.
Although Curitiba is not a high-seismic zone, correct anchoring and impact protection remain essential in busy warehouses. For cold rooms and humid buildings, we also review coating selection, condensation risk and material handling practices. Final structural approval should be provided by a locally licensed Brazilian engineer familiar with the building and applicable standards.
Relative scores compare wide aisle selective racking with high-density alternatives. They are not structural ratings.
Choosing an overseas racking supplier is a due-diligence exercise. Buyers need verifiable manufacturing capability, responsive engineering, export discipline and a warranty that survives the ocean voyage.
CE and ISO certified materials, controlled roll-forming tolerances and quality management recognised by clients in 60+ countries. Pre-shipment inspection is available before container loading.
Free consultation with professional engineers, 2D/3D warehouse layout design and itemised quotations. We work from your pallet data, building plan, forklift details and temperature profile.
Factory-direct supply without trading layers. Transparent, itemised quotations help distributors and project contractors compare beams, uprights, accessories, packing and freight on a like-for-like basis.
20+ production lines and 30,000 tons of annual output support delivery in 10–15 days after drawing approval, subject to order size, accessories, coating and factory schedule.
Ask every China racking supplier for the same evidence. A credible manufacturer should be able to provide drawings, load data, material specifications, coating details, packing lists, container loading photos and a clear warranty statement.
Curitiba is an inland destination. Your racking will usually arrive at a Brazilian seaport and then move by truck to the warehouse. The best port choice depends on sailing frequency, freight rate, inland distance and customs broker preference.
| Destination Port | Approx. Distance to Curitiba | Indicative Ocean Transit* | Planning Notes |
|---|---|---|---|
| Paranaguá, PR | About 100 km | 35–45 days | Main gateway for Paraná. Attractive for full containers and road transfer to CIC, Araucária and São José dos Pinhais. |
| Itajaí / Navegantes, SC | About 200 km | 32–42 days | Useful alternative for southern Paraná and Santa Catarina. Confirm seasonal port congestion and truck availability. |
| Santos, SP | About 400–450 km | 30–42 days | More sailings and carrier choice, but longer inland trucking. Often competitive when schedules or rates favour São Paulo. |
| Itaguaí / Rio de Janeiro, RJ | About 750–850 km | 32–45 days | Alternative when Santos or Paranaguá schedules are tight. Higher inland distance should be priced carefully. |
*Indicative ocean transit from main China ports. Production usually takes 10–15 days after drawing approval. Final schedules depend on carrier, routing, transshipment, Incoterm and customs clearance. FOB, CFR and CIF terms are available, with DDP on request through a Brazilian customs broker. Duties, taxes and local charges are not included unless expressly quoted.
A repeatable workflow reduces re-quotes, missing parts and installation delays on overseas racking projects.
Send pallet size, maximum load, quantity, warehouse CAD or PDF, forklift type, floor slab data, temperature profile and destination port.
Our engineers prepare a free 2D/3D layout, load calculation and preliminary bill of materials based on the data provided.
Receive a transparent quotation covering uprights, beams, accessories, packing and agreed freight terms, with value-engineering options where appropriate.
Production starts after drawing approval. Components are roll-formed, welded, surface-treated and packed with pre-shipment inspection.
We plan container loading, label bundles, prepare commercial invoice, packing list, bill of lading and certificate of origin for your broker.
Installation drawings, manuals and remote guidance are provided. On-site supervision can be arranged, and the 10-year warranty applies as quoted.
Incomplete data is the most common reason for re-quotes and shipping delays. Sharing these details at the start lets our engineers produce a buildable layout on the first pass.
Practical answers for importers, distributors, 3PLs and project contractors comparing China racking manufacturers.
Send your pallet sizes, loads, warehouse plan, forklift details and destination port. Our engineers will return a 2D/3D layout and itemised quotation within 48 hours. Mention whether the site is a standard warehouse, chilled or frozen room, or 3PL operation so that the right coating, accessories and spare-parts list can be included.
Send an Inquiry