Multi-Deep Lane Storage
Pallets are stored two to five+ deep on horizontal rails. Forklifts enter and exit within the lane, eliminating the need for working aisles and massively boosting density.
Grenada is a small-island logistics market with a very specific storage math: scarce and expensive warehouse space, high import volumes feeding retail, beverage, agro-processing and duty-free distribution, and a hurricane-exposed climate that puts a premium on space efficiency and structural safety. That combination makes the drive-in racking system one of the highest-return investments a Grenadian warehouse operator can make.
Unlike selective pallet racking, which sacrifices roughly half your floor area to working aisles, a drive-in system lets forklifts enter the racking structure itself, storing pallets multiple deep on rails supported by upright frames. For Grenadian businesses storing high-volume, low-SKU inventories — bottled beverages, flour and rice, construction materials, fertilizer, duty-free stock and seasonal retail — drive-in racking typically converts up to 80–85% of floor space into usable storage, versus 40–50% for single-deep selective racking.
As a direct manufacturer and wholesaler serving the Grenada market, we supply drive-in racking components built on 20+ automatic roll-forming lines, tested for load capacity, and shipped to St. George's and other Caribbean ports with documents, drawings and Spanish/English installation guidance. This guide is written for Grenadian importers, contractors, 3PL operators and facility managers who need real engineering answers — not a generic catalog.
Get Catalog
Drive-in racking is not one product — it is a family of configurations. Understanding the mechanics helps you spec the right lane count, depth and handling method for your Grenadian operation.
Pallets are stored two to five+ deep on horizontal rails. Forklifts enter and exit within the lane, eliminating the need for working aisles and massively boosting density.
Drive-in uses one entry/exit face (LIFO). Drive-through loads at one end and unloads at the other (FIFO). We specify the correct variant for your stock rotation policy and rack depth.
Full-height uprights with reinforced bracing carry the load uniformly. Rail beams and pallet supports are welded or bolted for consistent bay loading and simpler installation.
Phosphated pre-treatment plus electrostatic powder coating as standard, with hot-dip galvanized options for coastal and hurricane-exposed Grenadian warehouses.
Lane widths and rail spans are matched to your forklift model, mast height, turning radius and pallet overhang — critical in compact Grenadian warehouses.
Add lanes or bays as your volume grows without replacing the entire installation. All components are interchangeable across our drive-in, drive-through and selective ranges.
Uprights, anchors and bracing are calculated against your rack load, floor slab data and site seismic classification — a key requirement for structural safety in the Caribbean.
Rail, cross-bar, pallet support bar or decking configurations to suit pallet types (Euro, ISO, plastic, block). This avoids over-specification and reduces cost.
Drive-in racking works best when paired with the right supporting systems. These eight products are the most frequently specified combinations for Grenadian distributors, cold stores, 3PLs and construction supply warehouses.

A mid-density alternative between selective and drive-in — two pallets deep per position with selective access to higher-turn SKUs.
Learn more
Mesh decking prevents small items falling through and protects inventory in humid Grenadian environments.
Learn more
Fast-install snap-in beams make selective racking the flexible choice for mixed-SKU retail and distribution.
Learn more
Expand vertically when Grenadian warehouse footprints cannot grow — ideal for picking and small parts above drive-in lanes.
Learn more
For PVC pipes, steel bars, timber and construction stock — a frequent partner to drive-in racking in Grenada's building supply trade.
Learn more
High-load pallet racking configured for 3PL operators handling mixed client inventory and drop-trailer throughput.
Learn more
Adjustable beam levels let you reconfigure storage as Grenadian import volumes and SKU mixes evolve.
Learn more
Dexion-compatible pitch allows extension and replacement within existing Grenadian installations — minimizing downtime and waste.
Learn more
Grenada's economy is import-driven and tightly space-constrained. Most usable warehouse stock passes through the St. George's port area and is then distributed to retail, hospitality, construction and duty-free channels. Drive-in racking fits these specific patterns:
Grenadian buyers are no longer comparing racking on price alone. Structural safety, resilience to hurricane and salt exposure, and import total-cost are now the key decision factors.
Warehouse land in and around St. George's is limited and costly. Operators are prioritizing racking systems that convert existing cubic volume into usable capacity, making drive-in and mezzanine systems the preferred upgrade path.
After successive hurricane seasons, Grenadian importers increasingly insist that racking be anchored, braced and engineered with explicit wind/load guidance from the manufacturer — not just shipped flat-packed with no design support.
Buyers are bypassing regional resellers to work directly with manufacturers — reducing landed cost and getting direct access to layout engineering, drawings and warranty terms.
Racking is increasingly specified alongside pallet trucks, reach trucks and stackers so that aisle widths, beam loads and lane depths match the forklift actually used on the island.
A five-step process refined over 3,500+ international projects — designed to eliminate re-quote delays that slow island-market projects.
Building plan, pallet data, forklift type and destination port.
Free 2D/3D layout, load calculation and itemized quotation in 48 hours.
10–15 day production with inspection before packing.
Optimized container loading, export documents and ocean booking.
Installation drawings, manuals and remote guidance for local teams.
Total project timing = production (10–15 days) + ocean transit + customs clearance at destination. Use this table to plan inbound Grenadian projects realistically.
| Route / Port | Typical Ocean Transit | Common Racking Demand | Shipping Terms |
|---|---|---|---|
| St. George's (Grenada) | 28–40 days | Beverage, FMCG, hotel supply, retail | FOB / CFR / CIF |
| Port of Spain (Trinidad) | 26–38 days | Consolidation hub for Eastern Caribbean | CFR / CIF / DDP on request |
| Bridgetown (Barbados) | 25–36 days | Transshipment for Grenadian cargo | CFR / CIF |
| Kingstown (St. Vincent) | 28–38 days | Regional distribution & agro | CFR / CIF |
| Castries (St. Lucia) | 26–38 days | Tourism supply and duty-free | CFR / CIF |
| Miami / Jacksonville (US) | 3–6 days coastal + 3–7 days feed to Grenada | Consolidated LCL containers | FOB / DDP available |
Transit times are indicative and vary by carrier, transshipment, season and customs. Final schedules are confirmed with each quotation. For combined orders ≥1 x 40HQ we can arrange consolidated shipping through Caribbean feeder services.
Four commitments that matter when your supplier is several time zones and an ocean away.
CE and ISO certified materials, controlled roll-forming tolerances and quality recognized by clients in 60+ countries.
Free consultation with professional engineers, free warehouse layout design and the optimal storage solution for your operation.
Factory-direct supply with no trading layers — transparent, itemized quotations for Grenadian importers, distributors and project contractors.
20+ production lines and 30,000 tons annual capacity secure production in 10–15 days after drawing approval.
10-Year Warranty. All racking products are covered for ten years against quality issues caused by our design, manufacturing, transportation or installation guidance — a commitment Grenadian importers can verify with existing project references.
Send us your floor plan and pallet data. Our engineers will return a free 2D/3D layout, load calculation and itemized quotation within 48 hours — specifically for the Grenada market and its shipping routes.