Pallet Live Rack Push Back Pallet Rack

Product Description

Push-back pallet rack
Products Description
Push-back pallet rack is for high density storage. The depth is usually within 5 pallet positions. The rack takes “first-in-last-out (FILO)” access mode.
Characteristics
Applicable to warehouses with high cost per unit area, such as cold storage, warehouses in prime locations in downtown, etc.
Provide 20%-30% selectability.
Both safety and operating efficiency are higher than drive-in racks (drive through racks).
Compared with adjustable pallet rack, it increases the utilization rate of the ground by about 60%.
It can be used with a reach forklift or a counterbalanced forklift, and the forklift operation requirements are lower than drive-in pallet rack.
Components
The main components are upright frames, beams, support rails, and carrying carts. The rack has a bolted structure and is easy to dismantle and install in a new place.
Push-back pallet rack components
Middle cart
Middle Cart
Made of square tube. To save cost, the structure can be as simple as shown above. Each cart has 8 bearings. The design can be customized according to clients' needs.
Small cart or 1st cart
Small Cart or 1st Cart
Made of angle steel and square tube. To save cost, the structure can be as simple as shown above. Each cart has 8 bearings. The design can be customized according to clients' needs.
Protect rail
Protect Rail
Made of C-shape or U-shape steel. When the ground level needs no carts and pallets are placed directly on the ground, a protect rail is recommended.
Product Information
Rack Type
push back pallet rack
Rack Cost
Low, Medium Low, Medium, √Medium high, High, Higher
Pick-up Mode
first in, last out (FILO)
Structure
knock down or bolted
Forklift Aisle
around 3200mm, depends on customer's forklift parameter
Load Capacity & Dimension - Load capacity
≤1500kgs/pallet
Load Capacity & Dimension - Size
customized based on clients pallet
Components - Core components
frame (upright, also called column or post, bracing, base plate, fasteners), beam, support rail, cart, spacer
Components - Other
upright protector, frame protector, guide rail, protect mesh
Core Components Specification - Upright (mm)
80*60, 90*60, 90*70, 100*70, 120*95, 120*135
Core Components Specification - Beam (mm)
80*50, 100*50, 110*50, 120*50, 130*50, 140*50, 160*50
Finish
Epoxy resin electrostatic spraying (powder coating), galvanized
Coating thickness
no less than 60um for average thickness for powder coating
Material
Q235B, or Q355
Color
RAL5015 (sky blue), RAL5005 (signal blue), RAL2004 (pure orange), RAL1003 (signal yellow), RAL7035 (light grey). Customized colors are available when order above 2*40gp containers.
Store & Withdraw
Loading
The carrying cart runs along the inclined support rail. The 1st pallet is placed on the carrying cart, the 2nd pallet pushes the 1st pallet back into the rack, the 3rd pallet pushes the front 2 pallets into the rack, and the rest follow the same operation.
Unloading
The pallet at the pick-up end is carried out first, and the next pallet slides to the pick-up point by gravity for unloading; the others follow the same operation.
Unlike drive-in pallet rack, the forklift truck does not drive into the rack.
Store and withdraw operation
Recommend Products
Our Services
Our services
Packaging & Shipping
To suit different clients' needs, HBrack uses different storage methods. The following rules are followed:
For container order:
stretch film + carton board + packing belt + plywood stick + plywood pallet leg.
For less than container order:
plywood box or other that can keep the product safe during transportation.
Other:
based on clients' needs, such as vacuum packing etc.
Packaging and shipping
Packaging and shipping
Buying Guides
Buying guide
Buying guide
Company Information
Nanjing Hongbo Metal Products Co., Ltd. (hereafter referred to as HBrack) is a company full of vitality. It is committed to providing clients with better metal products and service. HBrack has designers who have been in warehouse rack design for more than 10 years. They have rich experience in complex structures. Products provided include adjustable pallet racking, shelving, cantilever racking, drive-in racking, mezzanine floor, live racking, drawer racking, stacking rack, wire container, steel pallet, steel cage, and other warehouse storage related products. Services provided include storage rack design, production, and installation. The products range from common pallet rack to complex mezzanine floor.
Company information
HBrack navigation
FAQ
Are you a factory or trading company?
We are a factory and also do trading products related to warehouse rack.
Do you provide samples? Are they free or extra?
We provide sample parts free of charge, and you just need to pay the freight. When you need a whole sample rack for testing the possibility, please contact us for sample cost.
I would like to visit you. Which city should I go to?
We are in Nanjing. When needed, we can help you book a hotel and traffic ticket. We will pick you up to the destination place. We have a sales person and driver who will be with you during the visit. You don't have to worry about traffic matters.
What engineering experience does HBrack have?
HBrack has engineers who are professional in warehouse rack design for more than 10 years and can handle projects from simple structures to complex ones.
How safe is payment and personal information?
Your money is safe with HBrack. We accept trading through a third party. The sales person has rich experience in warehouse rack, and all personal information is trackable.
Can HBrack help control my budget?
HBrack offers different designs to help clients control budget.

Related Products